Castrol Magnatec SAE 10W-40, API SP Semi Synthetic Engine Oil (4L)

CASTROL MAGNATEC SAE 10W-40 API SP SEMI SYNTHETIC ENGINE OIL (4L) is a high-performance semi-synthetic engine lubricant engineered to provide excellent protection, enhanced engine responsiveness, and reliable performance for modern petrol engines. Formulated to meet API SP standards, it features Castrol’s signature intelligent molecules that cling to engine surfaces, helping reduce wear during start-up and throughout driving. With its SAE 10W-40 viscosity grade, this oil ensures dependable lubrication from cold starts through high operating temperatures, making it suitable for a wide range of driving conditions and everyday use.

Service Interval
• Recommended oil change interval: approximately 7,500 – 10,000 km depending on driving conditions and manufacturer recommendations
• For severe driving conditions (frequent short trips, heavy traffic, hot climates), shorten service intervals
• Always refer to the vehicle owner’s manual for exact maintenance schedule

Key Benefit
• Semi-synthetic formulation for balanced protection and performance
• Intelligent molecules cling to engine parts for immediate protection at start-up
• Helps reduce engine wear and friction
• Excellent oxidation and thermal stability
• Supports improved fuel efficiency and throttle response
• Helps maintain engine cleanliness and reduce sludge formation

Vehicle/Equipment Compatibility
• Suitable for petrol (gasoline) engines requiring SAE 10W-40
• Meets API SP specification
• Recommended for passenger cars and light vehicles
• Compatible with naturally aspirated and turbocharged petrol engines (where specified)
• Always confirm manufacturer requirements before use

Product Specifications
• Capacity: 4 Liters (4L)
• Viscosity Grade: SAE 10W-40
• API Standard: SP
• Formulation: Semi-Synthetic
• Type: Engine Oil (Petrol)
• Packaging: Sealed bottle

Recommendation
• For dependable everyday engine protection and performance, use CASTROL MAGNATEC SAE 10W-40 API SP SEMI SYNTHETIC ENGINE OIL (4L) where 10W-40 API SP specification is required
• Replace engine oil and oil filter together during scheduled maintenance
• Do not mix with incompatible viscosity grades or lower specification oils
• Ensure proper oil level after filling
• Professional servicing is recommended for accurate oil replacement procedure